At the 2003 Nationals in Shreveport I noticed that Bob Sevey had installed a real
neat rudder stop on his MC. He installed a short section of track just above the gudgeon and
added a track stop to it. After installing the rudder, he slides the track
stop over to keep the rudder in place. Fast and easy and no fumbling with a split pin while
hanging over the stern of your boat!
Parts List:
- 1 - RF367 Track stop-spring loaded
- 2 - RF366 End stop
- 1 - RF365 12" long stainless track (only need about 4 inches)
- 2 - screws to attach strip to stern
Good luck and...See you on the starting line!